How to Rip Narrow Boards with a Circular Saw?

It’s undeniable that table saws are the best tools for ripping through long, narrow planks of wood. However, this doesn’t mean that you can’t cut narrow boards with other tools. 

A Circular saw is one of the most common wood cutting tools that you can find out there. It’s quite challenging to rip a narrow board with circular saws. However, if this is what you have at your hands, and if you don’t have a functional table saw, then you can use this too. 

In this guide, we’ll explain how to rip narrow boards with a circular saw easily. 

How to Rip Narrow Boards with a Circular Saw?

For cutting through narrow boards with a circular saw, these are the steps that you’ll need to follow:

Choosing a Long Platform:

You need to find a good platform on which you can saw through the board. The first thing that you need to ensure is that the platform must be longer than the board you’re cutting through. If you ensure this, the task will become considerably easier. 

Then again, the slab on which you’re going to place the board must be thicker than the board itself. Once you check these out, you can move on to the next steps. 

Clamp the Circular Saw Tightly:

You need to clamp the circular saw tightly on the surface. If you find that it’s getting hard to clamp it, you can use some wood to make sure that it stays tightly in its place. 

Put Some Reference Cuts:

Before you start on with the main process, you need to check the circular saw out to see if it’s perfect or not. Turn the saw on and start cutting on a sacrificial board. The goal here is to check whether the depth of the cuts is okay or not. You also need to check whether the thickness of the cuts is proper, whether you’re holding the saw properly, or if it’s parallel to the board or not. 

Making the Cut:

After the test drive, if you’re confident that everything is perfectly in order, then you can get on with the main process. You need to hold the saw where you’ve marked it. Now, turn the saw on, and glide it through the entire board smoothly. 

One common mistake most people make here is that they put external pressure on the saw. You don’t want to do that. The saw will proceed smoothly on its own. 

Take the Saw Off:

Once you’re done cutting the board, you can turn the saw off. However, don’t take the saw off until the blades stop spinning, or an accident might occur. 

Conclusion:

If you follow the steps mentioned here, you’ll be able to get a perfect cut on the narrow wooden boards with your circular saw.

Leave a Comment